Relcross Door Controls
*To Access Trade Price Lists
search
contact a Door Controls expert
T. 01380 729 600
sales@relcross.co.uk

451S.SP28 Surface Overhead Door Holder

451S.SP28 Surface Overhead Door Holder | Image 1
MPN: 451S.SP28
Finishes: SP28 Silver
from stock - next working day wherever possible
 
print this page
Enquire about this product
451S.SP28 Surface Overhead Door Holder

*Please enter your name

*Please enter an email addresss

*Please enter a valid email address
Security Check*:
  • Product Description
  • Installation and Technical Information

451S.SP28

Surface Overhead Door Holder - Stop Only Version for Door Openings 457mm - 584mm (Jamb to Jamb). Silver

Trade Customers - Ask us about trade terms/prices

Providing an effective ’out of the way’ auxiliary stop when the hold open function is not a requirement.

  • Dead-Stop Templating is recommended for applications where a wall or similar obstruction is in place at an opening angle of 110º or less (i.e., doors that open back-to-back). Dead-Stop Templating can be applied to Hold-Open, Stop-Only and Friction models. The Dead-Stop position is the point at which the shock-absorbing spring is fully compressed. Therefore, when Dead-Stop Templating is used, the initial degree of opening will be 5º to 7º less than the Dead-Stop opening. Example: If the holder is templated to a 100º dead stop, the door will hold open at an angle between 93º and 95º but no further than 100º
  • 450 series models require minimal door and frame preparation. They may be used in conjunction with most surface applied door closers. In some cases, optional drop brackets may need to be mounted on the closers. These brackets are available from Relcross for LCN parallel arm models
  • A heavy-duty holder or stop should be considered when doors and frames are subject to heavy, frequent use. Also, heavy-duty units should be considered on exterior doors subject to wind
  • An additional option on the 450 Series is the Angle Jamb Bracket for hinge-side or flush transom mounting. The angle jamb bracket affixes to the standard jamb bracket. If ordered with the overhead holder add suffix J. If needed separately order 450J - Finish

Concealed Mounting Surface Mounting
Size Door Opening 410 Series 450 Series 70 Series 79 Series
1 457 - 584mm 411 451 - -
2 585 - 686mm 412 452 702 792
3 687 - 838mm 413 453 703 793
4 839 - 991mm 414 454 704 794
5 992 - 1143mm 415 455 705 795
6 1144 - 1372mm - - 706 796


ANSIUL  

Best suited to standard (medium) duty situations on internal doors where door/frame protection is important.

The 450 series offers the industry’s widest variety of functions, base materials and finishes to fit all standard (medium) to light duty applications. The perfect combination of form and function. These versatile models can be used with almost all surface overhead door closers . Templates provide variable mounting positions allowing hold open and stop positions between 85° and 100°. 450 series holders and stops accommodate doors hung with conventional full mortice hinges, offset and centre hung pivot sets.

Related Products
454S.SP28 Surface Overhead Door Holder
MPN: 454S.SP28
Door Holder (Stop Only) for Doors 839mm - 991mm
 
AJK450.SP28 Angle Jamb Bracket Kit
MPN: AJK450.SP28
450 Series Angle Jamb Bracket Kit
 
455S.SP28 Surface Overhead Door Holder
MPN: 455S.SP28
Door Holder (Stop Only) for Doors 992mm - 1143mm
 
452S.SP28 Surface Overhead Door Holder
MPN: 452S.SP28
Door Holder (Stop Only) for Doors 585mm - 686mm
 
453S.SP28 Surface Overhead Door Holder
MPN: 453S.SP28
Door Holder (Stop Only) for Doors 687mm - 838mm
 
Facebook Twitter
Copyright © 2024 Relcross Door Controls  |  All Rights Reserved
Relcross Ltd (Relcross Door Controls)
Hambleton Avenue
Devizes
Wiltshire
SN10 2RT

t: 01380 729 600

w: www.relcross.co.uk
e: sales@relcross.co.uk