EADL.600 Power Transfer
EADL.600
Flexible and extendable door loop. Centres 600mm - Accommodates cable <9mm dia.
Trade Customers - Ask us about trade terms/prices.
This power transfer device provides a means of transferring electrical power from the door frame to the edge of a swinging door. The loop is fully exposed and should be mounted at an appropriate height on the secure side of the door. This design is compatible with all Von Duprin HD-EL electric latch retraction devices.
Optional Units
EPT.2 - Two 18 gauge wires up to 2A at 24Vdc with a maximum 16A surge
Housing – 229mm x 32mm x 38mm
EPT-10 – Ten 24 gauge wires up to 1A at 24Vdc with a maximum 16A surge
Housing – 229mm x 32mm x 38mm
Important Note
Careful consideration should be given to the overall opening arc of the door and the offset of the pivot point. This device is not suitable for use with swing clear hinges or centre-hung pivots. If in doubt, please consult the sales office.
Use with Von Duprin Electrified Exit Hardware.