Relcross Door Controls
*To Access Trade Price Lists
contact a Door Controls expert
T. 01380 729 600

EL9927EO.1220.US28 Electric Latch Surface Rod Device

EL9927EO.1220.US28 Electric Latch Surface Rod Device | Image 1
MPN: EL9927EO.1220.US28
Finishes: US28 Anodized Aluminium
from stock - next working day wherever possible
print this page
Enquire about this product
EL9927EO.1220.US28 Electric Latch Surface Rod Device | Image 2
EL9927EO.1220.US28 Electric Latch Surface Rod Device | Image 3
EL9927EO.1220.US28 Electric Latch Surface Rod Device

*Please enter your name

*Please enter an email addresss

*Please enter a valid email address
Security Check*:
  • Product Description
  • Installation and Technical Information


Heavy Duty Electric Latch Retraction Surface Vertical Rod Device - (suits doors <1220mm x <2134mm) Anodized Aluminium

The Quiet One®

A fluid dampener decelerates the touch bar on its return stroke and eliminates most noise associated with exit device operations. Furnished on all 99 Series Exit Devices

In accordance with BS EN 1125: 2008 Annexe A (informative) the device should be installed with the touch bar normally at a height between 900mm and 1100mm from the finished floor level when the door is in the secure position. Where it is known that the majority of the occupants of the premises will be young children, it is acceptable to reduce the fixing height accordingly.

Trade Customers - Ask us about trade terms/prices

  • Device Functions - Ships ready for functions; EO, DT & NL - for TP, K & L remove the NL drive screw from the reverse of the device
  • Device Lengths - This device suits doors to 1220mm, optional device suits doors to 915mm
  • Finishes - US28 (628) Anodized Aluminium. Alternative plated finishes are available to special order (consult Relcross for details)
  • Strikes - Ships with standard 299 roller strike, bottom strikes 248L-4 and 304L. Optional strikes are available to suit alternative frame details (consult the Relcross for details). 299 top roller strike with 21mm projection, used with conventional frames where a reveal >32mm exists. 248L-4 Bottom Strike for use with flat top thresholds. Since the strike projects by 10mm care should be taken to ensure installation does not pose a trip hazard. 304L Optional Bottom Strike for use where a mortice installation is desired. Please note - Both the 248L-4 & 304L Bottom Strikes are supplied as standard with all surface mounted vertical rod devices.
  • Fasteners - Includes fixings for both metal and timber doors 19mm 425 for bolt through fixings
  • Latch Bolt - Easy action friction free deadlocking latches cannot be depressed from the outside - with 19mm throw

Electric Options -

  • LX Latchbolt Monitor Switch
  • RX Touch Bar Monitor Switch
  • RX2 Double Touch Bar Monitor Switch (RX2 feature uses two RX switches)
  • ALK Alarm Exit Kit
  • EL Electric Latch Retraction

    The EL feature allows for the remote unlatching of exit devices. A control station operator can flip a switch to retract the latch bolt and immediately change an exit door to push-pull operation. A powerful, continuous duty solenoid retracts the latch bolt, either for momentary unlatching, or for extended periods of time. The EL feature is an alternative to manual dogging.

    If dogging is required, the standard cylinder dogging is not available, but special centre case dogging is available, specify SD-EL.

    EL devices are also useful with automatic door operators and may be applied to fire-rated applications when under the control of an automatic fire alarm system.

    The EL option does not include the power transfer from door to frame, the power supply, or the control operator. Refer to EPT-2 power transfer and the PS0.ELBB - 24Vdc Power Supply/Fire Relay (PSU) w. Battery Back-Up.

    Solenoid Specifications:

    • Continuous Duty – 24 VDC
    • Current Inrush – 16 Amps
    • Current Holding – 0.3 Amps

    Solenoid Resistance:

    • grn-yel 1.2 – 2 OHMS
    • grn-org 106 – 150 OHMS

    Special Centre Case Dogging  - Use prefix SD-EL, example SD-EL33L

  • PN Pneumatic Latch Retraction
  • CX Chexit Delayed Exit

Optional Trim (for Outside Access)

add suffix -

DT - Dummy Trim
EO - Exit Only
K - Knob 
L - Lever
L-BE - Lever (Blank Escutcheon)
NL - Night Latch
NL-OP - Rim Cylinder (Optional Pull Required)
TP - Thumbpiece

Von Duprin | 99 Series Standard Trim | relcross door controls®  

UK Fire Certification in accordance with EN 1634-1:2000 (timber)
WFRC No. C132276 120mins, BS EN 1125: 2008


Important note - the addition of outside access devices restricts the fire certification to 60 minutes.

Von Duprin 98/99 Series Exit Hardware

98/99 Data Sheet

Best suited to heavy duty situations on perimeter and internal doors where architectural grade safe egress in panic emergency situations is a requirement.

This range of architectural grade escape devices includes the 98 Series with its smooth mechanism case and the established 99 Series with its familiar grooved design. The two styles are mechanically and dimensionally identical and provide a solution specifically for standard stile applications down to 89mm.

Related Products
PS0.EL - 24Vdc Power Supply (PSU)
24Vdc Power Supply
EADL.600 Power Transfer
Door Loop 600mm - <9mm Cable
EPT.10.SP28 Power Transfer
MPN: EPT.10.SP28
Power Transfer (Ten 24 Gauge Wires)
PS0.ELBB - 24Vdc Power Supply (PSU) w. Battery Back-Up
24Vdc Power Supply w. Battery Back-Up
9927EO.1220.US28 Surface Vertical Rod Device
MPN: 9927EO.1220.US28
Surface Vertical Rod Device for Doors <1220mm x <2134mm
ER-36-33A/99.US28 Extension Rod @ 915mm
MPN: ER-36-33A/99.US28
Extension Rod @ 915mm (33A/99 Series)
HD-QEL9927EO.1220.US28 Quiet Electric Latch Surface Rod Device
MPN: HD-QEL9927EO.1220.US28
Quiet Electric Latch Surface Vertical Rod Device for Doors <1220mm x <2134mm
EL9927EO.915.US28 Electric Latch Surface Vertical Rod Device
MPN: EL9927EO.915.US28
Electric Latch Retraction Surface Vertical Rod Device for Doors <915mm x <2134mm
EPT.2.SP28 Power Transfer
Power Transfer (Two 18 Gauge Wires)
Facebook Twitter
Copyright © 2024 Relcross Door Controls  |  All Rights Reserved
Relcross Ltd (Relcross Door Controls)
Hambleton Avenue
SN10 2RT

t: 01380 729 600