Relcross Door Controls
*To Access Trade Price Lists
contact a Door Controls expert
T. 01380 729 600

GL1-FSM Gate Lock

GL1-FSM Gate Lock | Image 1
Finishes: No Finish
from stock - next working day wherever possible
print this page
Enquire about this product
GL1-FSM Gate Lock

*Please enter your name

*Please enter an email addresss

*Please enter a valid email address
Security Check*:
  • Product Description
  • Installation and Technical Information


Electromechanical Gate Lock - 12/24Vdc Monitored, Fail Safe

The GL1 provides 900 kilos of holding force for electrical and manually operated indoor or outdoor gates where pre-load is a concern. Ideal for swinging or sliding vehicle, pedestrian, or stock gate access control.

Trade Customers - Ask us about trade terms/prices

  • 900 kilos holding force
  • Operates under pre-load up to 45 kilos
  • Automatic dual-voltage—no field adjustment required
  • Accepts a standard mortice cylinder with Adams Rite MS cam for manual key override (not included)
  • Self-aligning receiver (+/- 13mm horizontally) helps compensate for gate misalignment and sag
  • Tamper resistant cast housing
  • Optional latch status monitor
  • Surface mount
  • MagnaCare® lifetime replacement, no fault, no questions asked warranty
  • Holding Force: 900 kilos
  • Current Draw and Voltage:
    - 12 Volts Initial (Peak): (~1.0 sec.) at 870mA - Reduced: 290mA
    - Power Consumption: 3.5 Watts
    - 24 Volts Initial (Peak): (~1.0 sec.) at 720mA - Reduced: 170mA
    - Power Consumption: 4.1 Watts
  • Operating Temperature: -58 to +167F [-50 to +75C]
  • Shipping Weight: 2.75 kilos
  • Warranty: MagnaCare Lifetime Replacement Warranty

Power Options

DC regulated power supplies (recommended)

PS01 - 12Vdc 2.0 Amp Power Supply/Fire Relay

PS02 - 24Vdc 1.0 Amp Power Supply/Fire Relay

  * (MagnaCare® lifetime replacement, no fault, no questions asked warranty)

Securitron GL Series - Electromechanical Gate Locks

Electromechanical gate solution offers one ton of holding power. It is vital that all welding be completed prior to making any electrical connections to the mounted GL1. Welding in or around an electrically connected lock assembly can cause damage to the electronic components. 
Related Products
20-001.118.C.626 Mortice Cylinder
MPN: 20-001.118.C.626
Mortice Cylinder - Classic C Section Keyway, 1.1/8"
GL1-FLM Gate Lock
Heavy Duty Electromechanical Gate Lock - Monitored, Fail Locked 12Vdc/24Vdc, 900 Kilos Holding Force
Facebook Twitter
Copyright © 2024 Relcross Door Controls  |  All Rights Reserved
Relcross Ltd (Relcross Door Controls)
Hambleton Avenue
SN10 2RT

t: 01380 729 600