Relcross Door Controls
*To Access Trade Price Lists
search
contact a Door Controls expert
T. 01380 729 600
sales@relcross.co.uk

S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip

S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip | Image 1
MPN: S52_, S104_, S105_ & S109
Finishes: BL, D, W
please request lead time
 
print this page
Enquire about this product
S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip | Image 2
S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip | Image 3
S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip | Image 4
S52_, S104_, S105_ & S109 Kerf-In Silicone Weatherstrip

*Please enter your name

*Please enter an email addresss

*Please enter a valid email address
Security Check*:
  • Product Description
  • Installation and Technical Information
Our perimeter gasketing products are designed to seal the gap around the top and the two sides of a door assembly. The top of the door (head) is the first number used in ordering a perimeter set of gasketing. The sides (side jambs) are the second number used in ordering. The side jambs are provided as two pieces. Numerous channels are available with a wide variety of inserts.

With Kerf-In

S52_

  • Available Lengths: 30.48M
  • Minimum space between the door face and the stop is 2mm.
  • The maximum space is 10mm

S104_

  • Available Lengths: 30.48M
  • Minimum space between the door face and the stop is 2mm
  • The maximum space is 6mm
  • Extruded from high-grade silicone
  • Silicone Weatherstrip is self-extinguishing and non-toxic
  • Stays flexible well below -100 degrees Fahrenheit and resilient above 400 degrees Fahrenheit
  • Unaffected by sunlight, ozone and ultraviolet rays
  • Impervious to fungus and mildew; and will not deteriorate under normal exposure

S105_

  • Available Lengths: 30.48M
  • Minimum space between the door face and the stop is 2mm
  • The maximum space is 10mm
  • Extruded from high-grade silicone
  • Silicone Weatherstrip is self-extinguishing and non-toxic
  • Stays flexible well below -100 degrees Fahrenheit and resilient above 400 degrees Fahrenheit
  • Unaffected by sunlight, ozone and ultraviolet rays
  • Impervious to fungus and mildew; and will not deteriorate under normal exposure

S109_

  • Available Lengths: 30.48M
  • Minimum space between the door face and the stop is 2mm
  • The maximum space is 8mm
  • Extruded from high-grade silicone
  • Silicone Weatherstrip is self-extinguishing and non-toxic
  • Stays flexible well below -100 degrees Fahrenheit and resilient above 400 degrees Fahrenheit
  • Unaffected by sunlight, ozone and ultraviolet rays
  • Impervious to fungus and mildew; and will not deteriorate under normal exposure

S52_ 100
AVAILABLE FINISHES: BL, W
AVAILABLE LENGTHS: 100'

S104_100
AVAILABLE FINISHES: D, W

S105_100
AVAILABLE FINISHES: D, W

S109_100
AVAILABLE FINISHES: D, W

Key to Inserts

E - EPDM, Solid
M - Magnetic
N - Neoprene or EPDM*
NB - Nylon Brush
P - Pile
PK - PemkoPrene®**
Q - Kerf-in Foam
R - Sponge Neoprene or EPDM*
S - SiliconSeal or Sponge Silicone (see individual part)
SB - Soft Brush
T - ThermoSeal™
TF - Triple Foam
V - Eco-V™
*N: As we “Green,” inserts “N” may be either Neoprene or EPDM.
*R: As we “Green,” inserts “R” may be either Sponge Neoprene or Sponge EPDM.
Over time, these inserts will move to EPDM material.
**PK: In order to best control our customers’ costs some PK (Santoprene™) products may be a silicon based elastomeric material with comparable performance.

Finishes

BL (Black) D (Dark Brown) W (White)

UL 

Pemko - Perimeter Gasketing

Environmental  Sealing & Seal Selection

Weather sealing will only apply generally to external doors where the degree of sealing required will be determined by the doorset location and the extent to which it is exposed to external climatic conditions. Doorsets located in protected external locations will generally require a lower level of sealing than exposed external doors that are subjected to high wind pressures.

Similar considerations may apply to internal locations where there is a need to control room pressures. e.g. laboratories or hospitals. The requirement for effective sealing applies to all buildings whether they are industrial, commercial, public or residential, indeed, any type of building where it is necessary to reduce the transfer of noise, air, smoke, odours and vermin that might otherwise find a route through the operating gaps around door leaves and windows.

The purpose of the door will have an influence on the choice of seals, e.g. sealing of external doors for (say) plant rooms that are only used by able bodied maintenance staff may be considered differently to doors in locations that are to be used by the general public and in particular disabled users. Pemko seals generally fall into a low operating force category but it may be necessary to use a combination of seals to meet performance requirements for some locations.

For exposed locations for use by the general public we recommend that consideration is given to the construction of performance lobbies. This permits the use of low force sealing arrangements that have little influence on the operation of the doors with the added advantage that some level of sealing is maintained where one of the lobby doors is open while the other remains closed.

Facebook Twitter
Copyright © 2020 Relcross Door Controls  |  All Rights Reserved
Relcross Ltd (Relcross Door Controls)
Hambleton Avenue
Devizes
Wiltshire
SN10 2RT

t: 01380 729 600

w: www.relcross.co.uk
e: sales@relcross.co.uk