Von Duprin QEL9947EO.US28 | Concealed Vertical Rod Device (99)

Von Duprin QEL9947EO.US28 | Concealed Vertical Rod Device (99)

Von Duprin QEL9947EO.US28 | Concealed Vertical Rod Device (99)

Finishes: US28 Anodized Aluminium


Earn0
reward points

Von Duprin QEL9947EO.US28 | Concealed Vertical Rod Device (99)


Security Check




  • Additional Product Details

    Heavy Duty Quiet Electric Latch Retraction Concealed Vertical Rod Device - (versions suit doors <915mm & 1220mm)

    Quiet electric latch retraction (QEL) provides electronic control of an exit device for environments where limited operational noise is desired. The QEL option is Von Duprin’s solution for hospitals, libraries, museums and theatres where ambient noise can be disruptive. The Quiet One® —A fluid dampener decelerates the touch bar on its return stroke and eliminates most noise associated with exit device operations. It is furnished on all 98/99 series exit devices. These devices always provide mechanical egress. The electrified latch retraction can be activated by an access system or building automation system to unlatch the exit device momentarily. Often, the QEL is used with a credential reader and access control system to unlock the door momentarily for authorised users. The QEL can also be configured to electronically retract the latch for an extended period to allow free entry. This is a convenient alternative to mechanical dogging. If manual dogging is required, the hex dogging option is available to order - specify HD-QEL. Special centre case dogging is also available; specify SD-QEL.

    Per BS EN 1125: 2008 Annexe A (informative), the device should be installed with the touch bar typically between 900mm and 1100mm from the finished floor level when the door is secure. Where it is known that most of the premises' occupants will be young children, it is acceptable to reduce the fixing height accordingly.

    • Device functions - Ships ready for functions; EO, DT & NL - for TP, K & L remove the NL drive screw from the reverse of the device
    • Universal - Non-handed, suits LH & RH doors
    • Device lengths - Devices suit door widths to 915mm; optional devices suit doors to 1220mm
    • Device heights - Devices suit door heights to 2533mm; the inclusion of the optional extension rod adds a maximum of 515mm, i.e. 3048mm overall 
    • Finishes - US28 (628) Anodized Aluminium. Alternative plated finishes are available for special order 
    • Strikes - Ships with 338 top strike & 385A bottom strike
    • QEL option available on all 98/99, 94/95 and 33A/35A series exit devices
    • Energy efficient motorised latch retraction utilises a standard 2 amp power supply, enabling longer wire runs from power
      source Relcross PS06 | 24Vdc 2.0 Amp Power Supply (PSU)
    • Quiet operation in both mechanical and electronic states
    • Modular design allows for a simplified installation
    • On-board installation and troubleshooting diagnostics built into the device
    • Auto adjust latch retraction – automatically adjusts latch throw and pull
    • Pushbar is pulled in electronically for quieter operation when dogged
    • Vandal resistant – detects and responds to events of attack and tampering
    • Fasteners - Includes fixings for both metal and timber* doors from 19mm - 57mm thick with sex bolts available to special order - 425 for bolt-through fixings - *specify 9947-WDC
    • Latch Bolt - Deadlocking latches - 16mm throw


    Selected Electrified Options -

    LX Latchbolt Monitor Switch
    RX Touch Bar Monitor Switch
    RX2 Double Touch Bar Monitor Switch (RX2 feature uses two RX switches)
    ALK Alarm Exit Kit
    EL Electric Latch Retraction
    PN Pneumatic Latch Retraction
    QEL Quiet Electric Latch Retraction

    CX Chexit Delayed Exit

    See also Von Duprin EPT2.SP28 | Power Transfer (EPT) and the Relcross PS06 | 24Vdc 2.0 Amp Power Supply (PSU)

    Optional Trim (for Outside Access) add suffix -

    DT - Dummy Trim (990 & 996)
    EO - Exit Only
    K - Knob (996)
    L - Lever (996)
    L-BE - Lever w. Blank Escutcheon (996)
    L-NL - Lever Night Latch (996)
    NL - Night Latch (990)
    NL-OP - Rim Cylinder - Optional Pull Required (20-022)
    TP - Thumbpiece (990)

    External Installations - As with any mechanical device, exposure to the elements may affect the operation and life of the device/finish and may void the warranty. If the device is used externally, we recommend the Von Duprin mechanical 98/99 rim exit device with one of the powder-coated finishes. We can add weep holes to mechanism cases if required. Regular lubrication of devices with DuraLube (available as part 091091) or similar may extend the life of the device. Electrified devices have not been tested or approved for outdoor use.

    This range of architectural-grade escape devices includes the 98 Series with its smooth mechanism case and the established 99 Series with its familiar grooved design. The two styles are mechanically and dimensionally identical and provide a solution for standard stile applications down to 89mm. They are best suited to heavy-duty situations on perimeter and internal doors where architectural-grade safe egress in panic emergencies is required.

    LCN Door Closers | Von Duprin Exit Devices | Schlage Locks

    revised-page-footer-rel---19-06-24---master.png

    Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 |  E: sales@relcross.co.uk 

  • Certification

    EN 1125: 2008

    UKCA | CE | ANSI | UL* | Warranty: 3 Years (Mechanical)

    *UL Listing for Fire Exit Hardware (add Suffix -F)

    Certificates, including DoPs, downloadable here

  • Resources | Downloads