Stanley CB1960R.10276.US32D | Hinge 102mm x 76mm x 3.3mm (1960)

Stanley CB1960R.10276.US32D | Hinge 102mm x 76mm x 3.3mm

Stanley CB1960R.10276.US32D | Hinge 102mm x 76mm x 3.3mm (1960)

Finishes: US32D Satin Stainless Steel


Earn0
reward points

Stanley CB1960R.10276.US32D | Hinge 102mm x 76mm x 3.3mm (1960)


Security Check




  • Additional Product Details

    Full Mortice Door Hinge 102mm x 76mm x 3.3mm.

    • CE-EC Certificate of Conformity 1720-CPD-0020
    • Certifire Approved
    • Manufacturing Facility ISO 9001 & ISO 14001 Certified
    • Limited Warranty - for the life of the building
    • Grade 304 Stainless Steel
    • BS EN1935:2002, Hinge Grade - 13
    • Vertical wear performance - Exceeds BS EN 1935:2002
    • Lateral wear performance - Exceeds BS EN 1935:2002
    • Fewer horizontal barrel lines provide an aesthetically pleasing appearance
    • Number of Test Cycles - 200,000
    • Test Mass of Hinged Element - 120 kilos
    • Unadjusted Door Weight <45 kilos
    • Adjusted Door Weight <80 kilos
    • Supplied Screws: Pozidriv wood screws - No.12 x 32mm (8 per hinge).
    • Box Quantity: 3 off singles per box (48 off singles per case) - Sold as Single Hinges


    Important Note: The test mass element of 120 kilos must not be interpreted as the maximum recommended capacity of all hinges passing this test successfully. Similarly, the number of test cycles should not be interpreted as the maximum number of available cycles for doors incorporating this hinge. Under certain circumstances, doors may exceed this figure significantly.

    The CB Series - Three knuckle CB series concealed bearing hinges are our top-of-the-range architectural solution. Built around a proven two-piece concealed bearing system that never needs maintenance, the CB bearing provides both lateral and vertical support.

    LCN Door Closers | Von Duprin Exit Devices | Schlage Locks

    revised-page-footer-rel---19-06-24---master.png

    Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 |  E: sales@relcross.co.uk 

  • Certification

    EN 1935: 2000 for Grade 13 Hinges

    CE | ANSI | UL | Certifire | 60 Mins Timber | Warranty: 30 Years (Mechanical)

    Certificates, including DoPs, downloadable here

  • Resources | Downloads