Securitron GL1-FLM Gate Lock | Relcross Door Controls

Electromechanical Gate Lock - 12/24Vdc Monitored, Fail Locked

The GL1 provides 900 kilos of holding force for electrical and manually operated indoor or outdoor gates where pre-load is a concern. It is ideal for swinging or sliding gate access control.

Key Override - Specify 20-001.118.C.626 Mortice Cylinder, 1.1/8" w. 2 Differ Keys - Classic C Section - Satin Chrome

900 kilos holding force
Operates under pre-load up to 45 kilos
Automatic dual-voltage—no field adjustment required
Accepts a standard mortice cylinder with Adams Rite MS cam for manual key override (not included)
Self-aligning receiver (+/- 13mm horizontally) helps compensate for gate misalignment and sag
Tamper-resistant cast housing
Optional latch status monitor
Surface mount
MagnaCare® lifetime replacement, no-fault, no-questions-asked warranty
Holding Force: 900 kilos
Current Draw and Voltage:
- 12 Volts Initial (Peak): (~1.0 sec.) at 870mA - Reduced: 290mA
- Power Consumption: 3.5 Watts
- 24 Volts Initial (Peak): (~1.0 sec.) at 720mA - Reduced: 170mA
- Power Consumption: 4.1 Watts
Operating Temperature: -58 to +167F [-50 to +75C]
Shipping Weight: 2.75 kilos
Warranty: MagnaCare Lifetime Replacement Warranty

Power Options - DC-regulated power supplies (recommended)

Relcross PS01 | 12Vdc 2.0 Amp Power Supply (PSU)
Relcross PS02 | 24Vdc 1.0 Amp Power Supply (PSU)

This electromechanical gate solution offers one ton of holding power. All welding must be completed before making any electrical connections to the mounted GL1. Welding in or around an electrically connected lock assembly can damage the electronic components.

LCN Door Closers | Von Duprin Exit Devices | Schlage Locks