- Additional Product Details
Full Mortice Continuous Hinge - Medium Duty @ 2159mm
Suits doors timber doors > 35mm - < 54mm
This unique and innovative hinge has a continuous geared design and is manufactured in extruded 6063-T6 tempered aluminium alloy. The hinge consists of three interlocking extrusions in a ’pin-less’ assembly intended for fixing to the full height of the door and frame. Each assembly consists of a frame blade, a door blade and a capping piece.- All aluminium components are clear anodized after milling and preparation to receive fixings to provide for a hard and durable surface finish with excellent corrosion-resistant properties (other finishes are available to special order)
- The design of the blades varies to suit several applications. Blades are held together using a common capping section providing an extensive range of standard and special designs for full mortice, half mortice and full surface applications
- The load-bearing properties of hinge types are varied by the quantity of Delrin ® - Teflon ® bearings used
- All hinge designs allow doors to open 180°. However, in some locations wall or frame decoration may prevent use of this facility. Special extended throw options are available for both full-mortice and half-mortice designs
- This hinge has been tested successfully under positive pressure fire test conditions to satisfy a wide range of UK fire performance requirements. The hinge also provides security enhancement features and assists in attaining other performance requirements where air infiltration is considered.
- Other variants provide for ‘finger safe’ features, preventing fingers from trapping in the gap between the heel of the door and the door frame.
- Performance & Durability - In the absence of an applicable standard for continuous geared hinges in the UK, we are reliant upon ANSI for confirmation of our hinge’s mechanical capabilities – ANSI/BHMA A156.26-2000:
- Medium Duty Hinges -
- 350,000 cycles (68 kilo door) Grade 3
- 150,000 cycles (136 kilo door) Grade 1
The flange detail assists with the accurate location of the hinge and provides for enhanced security and weather-sealing performances. This hinge is designed primarily for new build situations but is suitable equally for retrofit situations where an upgrade is desirable. Full mortice flange type hinges may be recessed, semi recessed or surface mounted between the frame and heel of the door.
Hospital type cap ends (supplied to special order with this hinge) are sloped, making cleaning easier and making it difficult to attach ropes, clothing apparel and other items, thus reducing the risk of self harm. The hinge is prepared with a 45 degree slope to the hinge cap.
LCN Door Closers | Von Duprin Exit Devices | Schlage Locks
Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 | E: sales@relcross.co.uk
- Certification
ANSI | UL | Warranty: 10 Years (Mechanical)
Certificates, including DoPs, downloadable here
- Resources | Downloads