Pemko 35041_NB & 35061_NB | Nylon Brush Weatherstrip

Pemko 35041_NB | Nylon Brush Weatherstrip

Pemko 35041_NB & 35061_NB | Nylon Brush Weatherstrip

Finishes: C, D, G


Earn0
reward points

Pemko 35041_NB & 35061_NB | Nylon Brush Weatherstrip


Security Check




  • Additional Product Details
    Brush gasketing products consist of dense type 6 nylon bristles. These gasketing products will conform to irregular surfaces, making them excellent for sealing almost any opening using minimal closing force.

    • All brush seals consist of densely compressed nylon filaments encased in high-quality aluminium retainers. These products are ideally suited for hollow metal and wood door applications (in-door sweep, jamb/header gasketing, and split astragal). Pemko brush weatherstripping products are also used on overhead, sectional, sliding, and automatic doors.
    • All brush seals significantly reduce the infiltration of light, air, wind, rain and snow; prevent heat loss and control the penetration of smoke and fumes
    • The dense nylon filaments conform to the contours of every sealing surface, providing a superior seal with an extremely low closing force
    • Brush remains flexible down to -40°F and has a melting point above 400°F
    • UV stabilised, dependable, long-lasting, cost-effective
    • All brush seals come with #6 x 5/8" stainless steel sheet metal screws
    • Punched with slotted holes for adjustment (except 35° angle types, which are drilled with 3mm holes)
    • All clear anodised brush products are supplied with a grey brush (available with a black brush upon request). Other finishes are supplied with a black brush


    35041_NB
    AVAILABLE FINISHES: C, D, G

    35061_NB
    AVAILABLE FINISHES: C, D, G

    Finishes

    C (Clear Anodized) D (Dark Bronze Anodized) G (Gold Anodized) Special finishes available upon request

    Brush perimeter seals are designed to seal the gap between the door and the door jamb. They may also be used at the door bottom. They are surface mounted to the frame and are usually supplied with a flat flange, which provides the best contact between the brush and the door's surface.

    LCN Door Closers | Von Duprin Exit Devices | Schlage Locks

    revised-page-footer-rel---19-06-24---master.png

    Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 |  E: sales@relcross.co.uk 

  • Certification

    UL | Warranty: 5 Years (Mechanical)

    Certificates, including DoPs, downloadable here

  • Resources | Downloads