Manual Flush Bolt (Metal Doors) - for use at the leading edge of one leaf of a pair of doors (top or bottom).

• When the active door is opened, the lever can be moved to the ‘up’ position, retracting the bolt and opening the inactive leaf. When the inactive leaf is closed, the lever can be moved to the ‘down’ position, projecting the bolt into the strike and securely locking the inactive leaf.
• Simplified installation in metal frames. Round bolt head requires only a punched hole. Use of strike optional. Special design of guide and flat sided bolt tip to prevent bolt rotation.
• Non-handed
• Bolt tip is 13mm diameter
• Bolt throw is 19mm with a 22mm vertical adjustment
• Bolt backset is 19mm
• Standard rod length is 305mm measured from the centre of the flush bolt body to the bolt tip
• Optional rod lengths available - Rod lengths may be increased to a maximum of 1219mm without affecting the validity of the fire certification
• DP1 & DP2 optional dust proof strike available
  

Correct hardware specification on plain meeting stile pairs of doors is vital to maintain integrity. Flush bolts provide a means to ensure fixed leaves are held in position (manual) or released (automatic) when the active leaf of a pair of doors is opened. Best suited to perimeter & internal rated pairs of hollow metal doors where alternative locking hardware may be unsuitable.

LCN Door Closers | Von Duprin Exit Devices | Schlage Locks

Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 |  E: sales@relcross.co.uk