- Additional Product Details
Suits Doors <2134mm H x <1220mm W
- Handed - Left Hand & Right Hand
- Use with 7215, 7226, 7227 19mm Offset Pivot
- 4 wires, 28 gauge (optional 8 wires available)
- Rated 50 VDC or VAC @ 3.5 amps. Continuous or 16 amps pulse, maximum pulse 400 milliseconds
- Non-load bearing
- Suits 45mm minimum door thickness, with 3mm bevel in 50mm
- Vertical adjustment range 5mm, with positive locking
Handing Chart - You must specify the hand of the door when ordering this product.This series of pivots is a complete line of centre-hung and power transfer pivots with all exposed parts made from brass or stainless steel for maximum corrosion resistance. High-strength brass and stainless steel forgings and castings are combined with precision bearings for smooth operation. Positive locking vertical adjustment mechanisms allow the installer to position the door precisely to balance the load. It is best suited to heavier internal non-rated doors where conventional hinges are unsuitable - for example, clean room doors and double action doors.
LCN Door Closers | Von Duprin Exit Devices | Schlage Locks
Relcross Limited (trading as) Relcross Door Controls | Hambleton Avenue | DEVIZES | Wiltshire | SN10 2RT | United Kingdom | T: ++ 44 (0) 1380 729 600 | F: ++ 44 (0) 1380 729 888 | E: sales@relcross.co.uk
- Certification
ANSI | Warranty: 1 Year (Mechanical)
Certificates, including DoPs, downloadable here
- Resources | Downloads