9140.US28 Automatic Operator
9140.US28 (Reg - Regular Arm)
Power Assisted Door Operator (Mains Powered) - Transom Mounted Push Side Mounting. Silver w. Matching Arm
Trade Customers - Ask us about trade terms/prices.
The Low Energy swing operator is a surface mounted electromechanical unit which is designed specifically to provide a means of automating new or existing single doors. The flexible microprocessor control allows activation by motion sensors, push button or by manual activation. In manual activation mode, the operator will provide power assisted opening of the door and spring power closing like a conventional door closer. With an array of built-in safety features, the Low Energy operator is an ideal means of providing easy access for low traffic entrance doors, internal doors and disabled WC facilities.
- For door widths from 660mm - 1219mm
- Single door, surface mounted
- On/Off switch included as standard
- Non-handed
- A 686mm single cover is standard. Full length covers are available up to 1245mm for single doors
-
Power Boost
-
Opening Speed
-
Backcheck Speed
-
Hold Open Time Delay
-
Backcheck Position
-
Closing Speed
-
Latch Position
- Safety Stop Providing Built-In Obstacle Detection
-
Push ‘N Go
-
Delayed Activation
- All Weather Fluid - Performs without variation:
Manual Closers - between -35° to +49°C
Electronic HO Closers & Automatic Operators - between +2° to +49°C
At approx. +75°C the fluid will begin to leak from the mechanism. The flash point is approx. 110°C
UK Fire Certification in accordance with EN 1634-1:2000 (timber or mineral composite)
WFRC No. 145309 120 mins.
Best suited to medium duty situations on internal doors where a low level of traffic is anticipated.
Electromechanical Automatic Operators - Low traffic capabilities. Designed for doors primarily where regular automation is desired but where able bodied users may operate the door manually.