4110 Series Door Closer - Stop Face (Push Side) Mounting

Product Code: 4111.US28 & 4116.US28
4110 Series Door Closer - Stop Face (Push Side) Mounting
  • Description and Uses
  • Installation Sheets & Templates

4110 Series Door Closer - Stop Face (Push Side) Mounting

The 4110 Smoothee® is LCN’s best performing heavy duty closer designed specifically for institutional and other rugged high traffic applications.

Features and Benefits

  • Ten Million Cycles
  • Cast Iron
  • Extra Duty Forged Steel Arm Standard
  • Double Heat Treated Steel Pinion
  • All Weather Fluid
  • LCN® Fast™ Power Adjust
  • Fast & Accurate Installation

UK Fire Certification in accordance with BS EN 1634-1:2014 (timber) - 120 mins
UK Fire Certification in accordance with BS EN 1634-1:2014 (steel) - 60 mins
WFRC No. 142058 - Issue 4. Valid Until 1st December 2019

EN 1154: 1996: A1: 2002/AC:2006

CE Certified. Certification applies to Stop Face (Push Side) Mounting Only (4111)
CE Certified. Certification applies to Stop Face (Push Side) Mounting Only (4116)

Specifications

  • Sized cylinders 4116 for interior doors to 1524mm and exterior (perimeter) doors to 1220mm
  • Non-sized cylinders 4111 for interior doors to 1372mm and exterior (perimeter) doors to 1067mm
  • Closer mounts parallel arm
  • Standard or optional custom powder coat finish
  • Standard 4110 series closer is shipped with extra duty arm, standard plastic cover, 4110-201 fifth screw spacer and self reaming and tapping screws
  • Optional plated finish on metal cover, arm and fasteners
  • Optional SRI primer for installations in corrosive conditions is available with powder coat only
  • Handed for clockwise (left hand) and anti-clockwise (right hand) closing doors
  • Surface Mounting
    For interior or exterior doors. Single acting cylinder on door top rail
  • Exposed regular arm to head frame
  • Maximum Opening
    Butt hinge template allows 180° with EDA arm and optional hold open arm
  • Optional CUSH-N-STOP & H-CUSH-N-STOP arms allow up to 110°
  • Consult Relcross for all pivot mounted installations
  • Butt Hinges should not exceed 127mm in width
  • Auxiliary Stop is recommended - Except CUSH options. Reveal less than 70mm, use 4110-30 CUSH SHOE SUPPORT
  • Stop Width minimum 25mm
  • Top Rail minimum 130mm from the underside of the stop (51mm with 4110-18 plate)
  • Delayed Action add suffix DEL to the selected closer. Not available on 4116. Delays closing from maximum opening down to 70° - adjustable up to 60 seconds.
  • Standard Finish - US28 powder coated silver

Mounting Options & Arms

4110 Series - Stop Face (Push Side) Mounting

Extra Duty Arm - 4110-3077EDA - 4110-62G - 4110-145
Non-handed parallel arm features forged, solid steel main and forearm for potentially abusive installations. Optional 4110-62G thick hub shoe for blade stop clearance. Optional 4110-145 flush transom shoe for single rebated installations. Optional shoes require special templating

Hold-Open Arm - 4110-3049EDA
Optional handed arm provides hold-open function, adjustable at shoe

Cush-N-Stop Arm - 4110-3077CNS
Optional, handed parallel arm features solid forged steel main arm and forearm with built-in stop in soffit shoe

LCN 4111.CNS.US28 Cush-N-Stop Door Closer

H-Cush Arm - 4110-3049CNS
Optional handed arm provides hold-open function with templated stop/hold-open points. Handle controls hold-open function

Spring Cush Arm - 4110-3077SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe

Spring H-Cush Arm - 4110-3049SCNS
Optional, non-handed parallel arm for abusive applications features solid forged steel main arm and forearm with spring loaded stop in the soffit shoe. Handle controls hold-open function

Cylinder - 4110-3071
Standard, handed cast iron cylinder assembly

Cover - 4110-72
Standard, non-handed plastic cover

Lead Lined Cover - 4110-72LL
Optional, non-handed plastic cover

Metal Cover - 4110-72MC
Optional, handed cover. Required for plated finishes and custom powder coat finishes

Plate - 4110-18, 4110-18CUSH
Required for push side mount where top rail is less than 130 mm, measured from the stop. Plate requires 51mm minimum top rail. Plate also used with CUSH Arm installations

Cush Shoe Support - 4110-30
Provides anchorage for fifth screw used with CUSH arm where reveal is less than 78 mm

Blade Stop Spacer - 4110-61
Lowers parallel arm shoe to clear 13 mm blade stop

PA Shoe Adapter - 4110-418
Provides horizontal mounting surface for parallel arm shoe on single rebated or flush frame

Cush Flush Panel Adapter - 4110-419
Provides horizontal mounting surface for CUSH shoe on single rebated or flush frame

How to Specify or Order

4111 Heavy Duty Door Closer (Handed)
4116 Heavy Duty Door Closer (Handed)

Finishes

US28 - Powder Coated Silver

Copyright © 2017 Relcross Ltd  |  All Rights Reserved
Relcross Ltd
Hambleton Avenue
Devizes
Wiltshire
SN10 2RT

t: 01380 729 600

w: www.relcross.co.uk
e: j.livesey@relcross.co.uk