9140 Series Automatic Operator - Top Jamb (Push Side) Mounting

Product Code: 9140.US28
9140 Series Automatic Operator - Top Jamb (Push Side) Mounting
  • Description and Uses
  • Installation Sheets & Templates

9140 Series Automatic Operator- Top Jamb (Push Side) Mounting

9140 automatic operator is an electrically powered low-energy operator. It provides easy access for people with disabilities, the elderly or the frail. Designed primarily for automatic opening applications that occasionally require manual operation. Complete with adjustable opening and closing speeds the microprocessor controller ensures reliability. This unit has been tested successfully to over three million cycles.

The 9140 series automatic operator is shipped with motor gearbox, control box, mounting plate, regular arm, metal cover and wood & machine screw pack.

  • For door widths from 686mm
  • Single door, surface mounted
  • On/Off switch included as standard
  • Non-handed
  • A 686mm single cover is standard. Full length covers are available up to 1245mm for single doors.

UK Fire Certification in accordance with EN 1634-1:2000 (timber or mineral composite)
WFRC No. 145309 120 mins.

Surface Mounting

9140 Series - Top Jamb (Push Side) Mounting

For interior or exterior doors. Single acting operator on head frame.
Exposed regular arm to door top rail.

Dual Independent Programme Memories

Each unit is pre-programmed to factory default settings. The installer can adjust the unit to meet the job site requirements. These field settings are locked into the computer’s memory. Any subsequent field adjustments replace the original field adjustments. The factory settings are always retained in memory and can be recalled to replace the field settings in just seconds, restoring the unit to its original programming.

On-Board Power Supply

Provides 24V DC output to power card readers, manual actuators and other peripherals.

Electronic Circuit Protection

Fused input circuit protection and fused output protection for 24 VDC peripherals

Visual Function Indicators

There are 2 LEDs for installation and trouble shooting feedback. The motor LED will illuminate when the motor drive circuit energizes this is when the operator is activated it will remain on only during the opening of the door and the power LED this will illuminate when power is applied to the board and remains illuminated as long as there is power applied to the board.

Programming Mode

Allows tailoring the following functions to meet specific site conditions:
  • Power Boost
  • Opening Speed
  • Backcheck Speed
  • Hold Open Time Delay
  • Backcheck Position
  • Closing Speed
  • Latch Position
  • Push ‘N Go
  • Delayed Activation

How to Specify or Order

9140 Automatic Operator

Finishes

US28 - Powder Coated Silver
Copyright © 2017 Relcross Ltd  |  All Rights Reserved
Relcross Ltd
Hambleton Avenue
Devizes
Wiltshire
SN10 2RT

t: 01380 729 600

w: www.relcross.co.uk
e: j.livesey@relcross.co.uk