Modular Ramp Assemblies - Offset (178mm Top Plate)

Product Code: R.5OS_, R.75OS_, R1OS_, R1.25OS_, R1.5OS_, R1.75OS_ & R2OS_
Modular Ramp Assemblies - Offset (178mm Top Plate)
  • Description and Uses
  • Installation Sheets & Templates

Modular Ramp Assemblies - Offset (178mm Top Plate)

About Modular Ramps (MR)

Ramp thresholds are often used to allow safe movement (most often via wheelchair access) between offset floor conditions. These shapes are designed to meet the requirements for accessibility.

About Threshold Assemblies Offset Applications (178mm Top Plate)

Our ramp assemblies consist of interlocking components, eliminating the need to weld joints. These assemblies can be configured to accommodate changes in floor conditions from 13mm to 57mm. For a detailed introduction to Modular Ramp Assemblies see Modular Ramp Threshold Assemblies - Flush Applications.

13mm Floor Offset
R.5OS_ & R.5OSMR_ **
AVAILABLE FINISHES: A, AK

19mm Floor Offset
R.75OS_ & R.75OSMR_ **
AVAILABLE FINISHES: A, AK

25.4mm Floor Offset
R1OS_ & R1OSMR_ **
AVAILABLE FINISHES: A, AK

31.75mm Floor Offset
R1.25OS_ & R1.25OSMR_ **
AVAILABLE FINISHES: A, AK

38.1mm Floor Offset
R1.5OS_ & R1.5OSMR_ **
AVAILABLE FINISHES: A, AK

44mm Floor Offset
R1.75OS_ & R1.75OSMR_ **
AVAILABLE FINISHES: A, AK

50.8mm Floor Offset
R2OS_ & R2OSMR_ **
AVAILABLE FINISHES: A, AK

NOTE: Products shown in this section may not be drawn to scale.

**Mitre Returns are not ADA or Equality Act 2010 Compliant (i.e. that part of the ramp assembly only).

Pemkote™ Non-Slip Coating

Pemkote™ is highly recommended for all threshold assemblies, especially exterior conditions where moisture may be present.

Finishes

A (Mill Finish Aluminum) AK (Mill Finish Aluminum with Pemkote™ Non-Slip Coating)
Copyright © 2017 Relcross Ltd  |  All Rights Reserved
Relcross Ltd
Hambleton Avenue
Devizes
Wiltshire
SN10 2RT

t: 01380 729 600

w: www.relcross.co.uk
e: j.livesey@relcross.co.uk